MT 3315 Microcontroller and Programmable Logic Controller

LABORATORY MANUAL (CYCLE 1)
OBJECTIVE

            To expose the students the operation of Micro controller and Programmable Logic Controller and gives them hands on experience.

LIST OF EXPERIMENT

1. Study of Micro controller Kits.

2. 8051 / 8031 Programming Exercises.

3. Stepper Motor interface.

4. D.C. motor controller interface.

5. Study of interrupt structure of 8051.

6. Linear actuation of hydraulic cylinder with counter and speed control.

7. Hydraulic rotation with timer and speed control.

8. Sequential operation of pneumatic cylinders.

9. Traffic light controller.

10. Speed control of DC motor using PLC.

11. Testing of Relays using PLC.

To download the lab manual Click Here

POWER ELECTRONICS LABORATORY Manual

LIST OF EXPERIMENTS

1. Study of SCR, MOSFET & IGBT characteristics
2. UJT, R, RC firing circuits for SCR
3. Voltage & current commutated chopper
4. SCR phase control circuit
5. TRIAC phase control circuit
6. Study of half controlled & fully controller converters
7. Study of three phase AC regulator
8. Speed control of DC shunt motor using three phase fully controlled converter.
9. SCR single-phase cyclo converter
10. SCR series and parallel inverters
11. IGBT Chopper
12. IGBT based PWM inverter (single phase)

To download the lab manual Click Here

Electrical Machines & Drives Lab Manual

EE3208 ELECTRICAL MACHINES AND DRIVES  LABORATORY

OBJECTIVE
To expose the students the  operation of electrical drives and gives them hands on experience.

LIST OF EXPERIMENT

1. Load test on D.C. shunt motor.

2. Speed control of D.C. shunt motor.

3. Swinburne’s test.

4. Load test on three phase induction motor.

5. No load and blocked rotor tests  on three  – phase induction motor.

6. Load test on single phase induction motor.

7. No load and blocked rotor tests on single phase induction motor.

8. Performance characteristics of single phase transformer.

9. Study on the performance characteristics of synchronous motors.

10. Study on the performance characteristics of stepper motor.

Click Here to download the full document

Microprocessor 8085 Simulator - Free download

Here is a software that will do all the activities  of Microprocessor kit. Apart from this will have added features like

• It shows the contents of Registers (A,B,C,D,E,H,L).
• It also shows the contents of SP(stack pointer) and PC(Program Counter).
• We can see the Total T-states, Machine cycle and time for execution.
• By using this software we can adjust the frequency.
• Input can be loaded directly in the single scree.
• User friendly command mode.

For downloading this Microprocessor Simulator 8085 software Click Here

Micro Processor 8085 Simulator

By using this software you can execute and check all type of microprocessor 8085 programs. Its a free version. You can download the software freely from the below link. Its similar to the microprocessor 8085 kit which we are using in the laboratory. If you have any doubt in executing any problems using it, feel free to contact me.

A 8085 SIMULATOR with stepper motor interfacing and keyboard interrupts, Includes load and save options and comes with 10 sample programs. The simulator clearly shows the flags being affected instruction being executed and the stack. Try it out. If you find any bugs please report it . The program is 2.11Mb in size.

For downloading this 8085 simulator click here

Microprocessor Lab Manual

LIST OF EXPERIMENTS
I. PROGRAMMING 
1. Addition of two 8 – bit numbers, sum of 8 – bits and 16 bits.
2. Decimal addition of two 8 – bit numbers Sum: 16 bits.
3. 8 - bit subtraction.
4. 8 – bit decimal subtraction.
5. Additional of two 16 – bit numbers, Sum: 16 bits or more.
6. Multibyte subtraction.
7. To arrange a series of numbers in Ascending order.
8. To arrange a series of numbers in Descending order.
9. 8 – bit Multiplication.
10. 8 – bit Division.
11. Decimal to hexadecimal conversion and hexadecimal number to decimal number
conversion.

II. INTERFACING 
1. Analog to digital conversion.
2. Digital to analog conversion.
3. Steeper motor controller.
4. Temperature controller.

To Download the  I. PROGRAMMING  Click Here 

To Download the  II. INTERFACING  Click Here

Dynamic of Machinery Lab Manual - Cycle -I

ME3219

MACHINE DYNAMICS LABORATORY

Sl. No.	Name of the Experiment	Signature
1	Governor – Determination of sensitivity, effort, etc. for Watt, Porter, Proell, Hartnell governors.
2	Cam – Study of jump phenomenon and drawing profile of the cam.
3	Motorised Gyroscope – Verification of law’s – Determination of gyroscopic couple.
4	Whirling of shaft – Determination of critical speed of shaft with concentrated loads.
5	Determination of Moment of inertia by oscillation method for connecting rod and flywheel.
6	Determination of influence co–efficients for multidegree freedom suspension system.
7	Balancing of reciprocating masses.
8	Balancing of rotating masses.
9	Vibrating system Spring mass – system – Determination of damping co – efficient of single degree of freedom system.
10	Determination of transmissibility ratio – vibrating table.
11	Determination of torsional frequencies for compound pendulum and flywheel – system with lumped Moment of inertia.
12	Transverse vibration – free – Beam. Determination of natural frequency and deflection of beam.
Content beyond the Syllabus
1	Kinematics of universal joint
2	Determination of velocity and acceleration of four bar mechanism

For full document click here

Engineering Practice Lab Manual for first year students

STUDY OF PLUMBING TOOLS AND EQUIPMENTS

INTRODUCTION:

          In the Iron Age, people living in Greece realised the importance of lead and used it for their household Work. They made sheets out of it and also used them to make roof for their houses. They used lead to make lead pipes so that they could transfer drinking and sewage water.

          Lead was called as “Plum bum” in Latin and those who worked on Plum bum are called as plumbers. Plumbing is the work related with fitting, repair of pipe - lines and appliances of water or any other fluids.

          In short, plumbing is the art, which is involved in the design, installation and maintenance of pipe, pipefitting and other accessories in a building. It plays a major role in the construction of every building.

To download the full book click here